advice needed (NC 30/35 loom differences)
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: advice needed (NC 30/35 loom differences)
Cool pm me your address and i'll get it in the post,
I'll pay pal you the cost of postage.
I have a 35 left switchgear.
Any thoughts on were i might find the rad fan connector on the 35 loom?
I'll pay pal you the cost of postage.
I have a 35 left switchgear.
Any thoughts on were i might find the rad fan connector on the 35 loom?
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
- Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: advice needed (NC 30/35 loom differences)
No its fine dont worry about the postage, if you can wait till friday i'll get the misses to do it through work.
Ive got a scrap 35 (i think) loom in the loft that might still have the rad connector on it, if it has i'll sent it aswell. You want the loom end not the fan end yes? if that makes sense lol
Ive got a scrap 35 (i think) loom in the loft that might still have the rad connector on it, if it has i'll sent it aswell. You want the loom end not the fan end yes? if that makes sense lol
- mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: advice needed (NC 30/35 loom differences)
Drunkn Munky wrote:No its fine dont worry about the postage, if you can wait till friday i'll get the misses to do it through work. Cool
Ive got a scrap 35 (i think) loom in the loft that might still have the rad connector on it, if it has i'll sent it aswell. You want the loom end not the fan end yes? Thats right, but i can't even see any wires were the connector has been removed![]()
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
- mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: advice needed (NC 30/35 loom differences)
Just a wee update. Start/kill switch has been replaced withe correct unit (thanx DM)
i found the wires that the radfan plug had been cut off (taped up inside the loom) and have replaced the plug (again thanx DM)
So all i have to do now is swap the nc30 lower rad that i have for an nc35 lower rad
i found the wires that the radfan plug had been cut off (taped up inside the loom) and have replaced the plug (again thanx DM)
So all i have to do now is swap the nc30 lower rad that i have for an nc35 lower rad
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
- Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: advice needed (NC 30/35 loom differences)
Do you mean rad fan? May have one of them too :)
- mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: advice needed (NC 30/35 loom differences)
Lol, fancy a swap?
We'll be swaping wives soon
We'll be swaping wives soon
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
- Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: advice needed (NC 30/35 loom differences)
lol let me dig it out and check first, i never actually fitted it to my rvf so cant be certain it is a rvf one but will grt up in the loft later and check
- Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: advice needed (NC 30/35 loom differences)
Mo, not sure if this is 30 or 35
You do not have the required permissions to view the files attached to this post.
- mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: advice needed (NC 30/35 loom differences)
think Thats a 35 unit, just what i need.
I'll get som pics up of the 30 unit i have here and you can check it out.
I'll get som pics up of the 30 unit i have here and you can check it out.
Last edited by mo haggs on Wed Feb 15, 2012 6:23 pm, edited 1 time in total.
vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.
- mo haggs
- Site Supporter
- Posts: 618
- Joined: Thu Jun 19, 2008 1:02 pm
- Bike owned: bikeless
- Location: belfast, n.ire
Re: advice needed (NC 30/35 loom differences)



vic-vtrvfr wrote:they're like rocking horse poo with sprinkles of unicorn horn on top.