My NC30 Projects.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Smev
- Site Supporter
- Posts: 858
- Joined: Tue Apr 29, 2008 8:54 pm
- Bike owned: NC30 of course
- Location: The Mighty Cornwall :-)
Re: My NC30 Projects!!
If you use a Rick O chain moving kit?!! - it moves the chain to the left by 5mm and it also helps if you run a 520 pitch chain - worth a go to fit the Dymags 
Mister Donut Rep NC30
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: My NC30 Projects!!
Smev wrote:If you use a Rick O chain moving kit?!! - it moves the chain to the left by 5mm and it also helps if you run a 520 pitch chain - worth a go to fit the Dymags
Nice!!
-
Micro Monkey
- Site Supporter
- Posts: 168
- Joined: Thu May 15, 2008 4:42 pm
- Bike owned: CG125, RVF400, YZF1000SP, 996
- Location: Gloucester
Re: My NC30 Projects!!
Think you may have to go with both the 520 and R.O kit, you may get away with just moving the sprockets out the 5mm the kit will allow but pretty sure it will be tight with just this. What is the exact outer rim width of your mag, will check it with mine, see if they are the same.
It just isn't right if something you buy, fits without probs
It just isn't right if something you buy, fits without probs
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: My NC30 Projects!!
Kris's Outer rim measurement is a shade under 6".
My PVM's are 5.5 with 160 supercorsa's and go straight on. There RC30 fitment too i think.
My PVM's are 5.5 with 160 supercorsa's and go straight on. There RC30 fitment too i think.
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: My NC30 Projects!!
Tony, do you think these Dymags are RC30 fitment? Can't understand this as the bloke I bought them off assures me they go straight on no problems with 160 tyres!!
Kris
Kris
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: My NC30 Projects!!
Im sure they will mate, like i said mine do. I think yours are NC fitment due to the face where the spacer sits matches the NC spacer, my pvm has a slightly larger face.
-
Smev
- Site Supporter
- Posts: 858
- Joined: Tue Apr 29, 2008 8:54 pm
- Bike owned: NC30 of course
- Location: The Mighty Cornwall :-)
Re: My NC30 Projects!!
I used the Rick O Kit and a 520 chain to fit the VFR750 rear to my bike - no clearance probs at all
Plus the 520 chain is that little bit lighter so less weight to carry around or the engine to move
Plus the 520 chain is that little bit lighter so less weight to carry around or the engine to move
Mister Donut Rep NC30
-
ibby4585
- Site Supporter
- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Re: My NC30 Projects!!
Right, I'm just gonna get the tyres and make them fit!
What are pirelli diablo rosso tyres like? Can we get them over here?
What are pirelli diablo rosso tyres like? Can we get them over here?
-
Micro Monkey
- Site Supporter
- Posts: 168
- Joined: Thu May 15, 2008 4:42 pm
- Bike owned: CG125, RVF400, YZF1000SP, 996
- Location: Gloucester
Re: My NC30 Projects!!
Right i have measured my rear rim, outer to outer and would you believe it, mine is 6.5 inches wide so you will have no probs at all fitting the maxxis tyre and your dymags. You may just have to lightly sand the right tyre edge though.
Last edited by Micro Monkey on Sat Oct 23, 2010 10:07 pm, edited 2 times in total.
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: My NC30 Projects!!
These are the tyres you are looking foribby4585 wrote:Right, I'm just gonna get the tyres and make them fit!
What are pirelli diablo rosso tyres like? Can we get them over here?
http://www.sticky-stuff.co.uk/product_i ... s_id=10695