NC30 Caliper brackets (brembo 4 pad)

[matt_nc30]

Bought the SES caliper brackets from JAP4 to fit the brembo 4 pad type calipers on my 30

Went to fit them today to find the gap from the bracket to the fork mounting points are to far apart for 1 spacer per hole.

2 are required but this doesnt look right, and there isnt enough to do this for both calipers.

Any ideas whats wrong, have i got the wrong brackets?


Pissed me off as i drained all the old fluid out of my old calipers before checking all the bits


Cheers

Matt

[vfrman]

Got any pics? I can't seem to get a good visual of your problem.

[Neosophist]

I cant visualise that either.. there are two common brackets though depending on calipers.. the one you need will be 65mm if i remember?



They just bolt on?

[matt_nc30]

Yeah, my brackets look like that but with out the raied step, mine are just flat.

The brackets fit the calipers fine, and onto the forks, but dont meet the forks as the gap is to wide.

Il get a pic up later to try and show it.

[Neosophist]

Yeah, my brackets look like that but with out the raied step, mine are just flat.

The brackets fit the calipers fine, and onto the forks, but dont meet the forks as the gap is to wide.

Il get a pic up later to try and show it.

Have you got them backwards!? The brackets should bolt onto the forks and not the calipers if anything..

[matt_nc30]

The bracket attached to calier




The gap between the bracket and forks






Will only fit with spacers to fill the gap like this



Matt

[matt_nc30]

The bracket attached to calier




The gap between the bracket and forks






Will only fit with spacers to fill the gap like this



Matt

[viper_biker]

Sounds like you have the wrong spacers. Easy fix, just get in touch with Gavin and I'm sure he'll send you the replacement sized ones.

[Neosophist]

Aaah.. so they actualyl line up ok?

I've looked on the net and the 'brembo' adapaters seem to come with washers



As seen in this pic.. get in touch and you'll get some :D

[matt_nc30]

Yeah they are the brackets i bought, i have the spacers but need to be twice the thickness.

More like


Compared to the ones i have