Thread pitch for RVF fork pinch bolts?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Giffin101
- Site Supporter
- Posts: 62
- Joined: Fri Apr 11, 2008 9:42 pm
- Location: Wirral, Merseyside
Thread pitch for RVF fork pinch bolts?
Am I correct in thinking it's 1.25mm?
Do all the aluminium parts share this pitch?
Cheers.
Do all the aluminium parts share this pitch?
Cheers.
-
JZH
- Site Supporter
- Posts: 249
- Joined: Mon Oct 27, 2008 7:02 pm
- Bike owned: RSCBRRVFVFRST
- Location: London, UK/So.Cal., USA
- Contact:
Re: Thread pitch for RVF fork pinch bolts?
Forks and brakes have odd pitches internally, but I've never seen an M8 bolt on a Honda that wasn't standard pitch (which is 1.25 for an M8). Same goes for everything else, actualy, except M10, which is normally also 1.25 on a Honda (standard pitch being 1.5). Put an M8 together with a Honda M10 and the threads should fit together perfectly.
Ciao,
Ciao,
-
Giffin101
- Site Supporter
- Posts: 62
- Joined: Fri Apr 11, 2008 9:42 pm
- Location: Wirral, Merseyside
-
28hodge
- Site Supporter
- Posts: 650
- Joined: Tue May 17, 2011 4:26 pm
- Bike owned: nc30 (track) Yam YZ250 (MX)2st
- Location: Kendal, Cumbria, Northwest
Re: Thread pitch for RVF fork pinch bolts?
Pro bolt sell a little thread pitch checker tool, its about a £5 posted and is really useful little tool.