nc24, nc30 carb swap

dave_c24 · Post by **dave_c24** » Wed Jun 10, 2009 9:01 pm

hi,

has anyone tried fitting nc30 carbs to an nc24, the carb necks are the same diameter,only main differnces is the slides are aout 3mm shorter on the nc30 carbs and fuel pipe diameter from tank.

My mate has a good working spare set that his bike ran very well on and we wondered if it was worth a try?

cheers dave

Post by **CMSMJ1** » Wed Jun 10, 2009 9:38 pm

Are you sure the inlets are the same distances apart?

I have had a set of 24 carbs in my mitts and don't reckon they would have fit onto my NC30

Give it a blast anyways and let us know if they go on...

dave_c24 · Post by **dave_c24** » Wed Jun 10, 2009 9:56 pm

CMSMJ1 wrote:Are you sure the inlets are the same distances apart?

I have had a set of 24 carbs in my mitts and don't reckon they would have fit onto my NC30

Give it a blast anyways and let us know if they go on...

didnt try measuring that, i will have a look tommorow

cheers dave

Post by **Neosophist** » Thu Jun 11, 2009 12:42 am

They might do, theres not much difference between the carbs.

You could always if worst comes to worst mount them to the NC24 plate and use some linkages off the NC24 carbs etc.

dave_c24 · Post by **dave_c24** » Thu Jun 11, 2009 10:35 am

Neosophist wrote:They might do, theres not much difference between the carbs.

You could always if worst comes to worst mount them to the NC24 plate and use some linkages off the NC24 carbs etc.

i think the top plates are slightly different, dont jhave them infront of me, hoping my airbox will jus bolt on though

i will keep you posted

cheers dave

nc24, nc30 carb swap

nc24, nc30 carb swap

Re: nc24, nc30 carb swap

Re: nc24, nc30 carb swap

Re: nc24, nc30 carb swap

Re: nc24, nc30 carb swap