NC24 Forks

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC24 Forks

Post by Neosophist »

Do you have a picture of the microfiche? If I recall its not very clear on there anyway... If you have your forks apart take a picture
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
dave_c24
Settled in member
Posts: 139
Joined: Tue May 05, 2009 8:51 pm
Bike owned: 1991 vfr 400 nc30
Location: Newmarket
Re: NC24 Forks

Post by dave_c24 »

Neosophist wrote:Do you have a picture of the microfiche? If I recall its not very clear on there anyway... If you have your forks apart take a picture
nah havent got it, only got the one for carbs.

dont have forks apart at the moment, stuck them back together as they were until some new forkseals arrive.i think the internals are mixed up but im not sure. do you have a copy of the microfiche?

cheers for your reply

dave
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC24 Forks

Post by Neosophist »

yeah! I'll take a picture tomorrow when im at home. :)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
dave_c24
Settled in member
Posts: 139
Joined: Tue May 05, 2009 8:51 pm
Bike owned: 1991 vfr 400 nc30
Location: Newmarket
Re: NC24 Forks

Post by dave_c24 »

nice one :grin:

cheers dave
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC24 Forks

Post by Neosophist »

Image

I think this is a bit too small to see, so below you'll find a link to the full-size version :D (2mb)

Hope that helps! ^_^

http://www.jacksons-lair.co.uk/P1020714.JPG
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
dave_c24
Settled in member
Posts: 139
Joined: Tue May 05, 2009 8:51 pm
Bike owned: 1991 vfr 400 nc30
Location: Newmarket
Re: NC24 Forks

Post by dave_c24 »

hi,

thanks that is a great help, im missing items 5 and 6 on the antidive fork legm they are 3 washers any idea what they are in there for?

the previouse owner has made a right hash up of the bike, everything i see to take off the bike is wrong or has been put together wrong :(

cheers dave
User avatar
spooky
Site Supporter
Site Supporter
Posts: 429
Joined: Wed Apr 30, 2008 8:37 pm
Bike owned: nc24
Location: Newtownards Co.Down N.Ireland
Re: NC24 Forks

Post by spooky »

I've just done my fork seals but looking at that microfish makes me worry. part no 9 looks like it go's under the seal not above it as I've just done. opps.
\That wee smilie can drink some Guinness. No wonder he's yellow.
User avatar
spooky
Site Supporter
Site Supporter
Posts: 429
Joined: Wed Apr 30, 2008 8:37 pm
Bike owned: nc24
Location: Newtownards Co.Down N.Ireland
Re: NC24 Forks

Post by spooky »

Just checked my forks and they are not leaking so maybe it won't matter anyways.
\That wee smilie can drink some Guinness. No wonder he's yellow.
dave_c24
Settled in member
Posts: 139
Joined: Tue May 05, 2009 8:51 pm
Bike owned: 1991 vfr 400 nc30
Location: Newmarket
Re: NC24 Forks

Post by dave_c24 »

spooky wrote:I've just done my fork seals but looking at that microfish makes me worry. part no 9 looks like it go's under the seal not above it as I've just done. opps.
yeah part 9 the big washer goes above the top bush, i used it to help fit the top bush by but taping the washer with a punch and driving the bush hope then the seal sits ontop of it and the circlip retains the lot. i dont know how much difference it will make?? wait and see.

ive now rebuilt my forks again as thanks to the microfice i discover that the previous owner had interchanged all the parts between the forks and they were totaly messed up! sweet as a nut now! just hope the dont start leaking!!! :pray:

cheers for all you help guys :worthy: :worthy:

dave
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC24 Forks

Post by Neosophist »

No problemo. Glad I could help.

Thats the only problem with old grey imports, when people start messing with them when they dont know what there doing :)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

Post Reply