nc23 tri arm light head bulbs

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
lloydiecbr
Site Supporter
Site Supporter
Posts: 271
Joined: Fri Dec 26, 2008 11:11 pm
Bike owned: VTR1000
Location: coventry
nc23 tri arm light head bulbs

Post by lloydiecbr »

as above . what tipe are they and where to get them from . any help will be very great thank you
Waza4
Settled in member
Posts: 176
Joined: Fri May 02, 2008 1:49 pm
Location: Devon
Re: nc23 tri arm light head bulbs

Post by Waza4 »

David Silver or ask LP to send you a copy of the H4 conversion.
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: nc23 tri arm light head bulbs

Post by leopard_pagan »

H4 conversion headlight unit (NOT bulb) also requires the relay mod which i dont have... yet
you can fit normal H4 bulbs in by bodging the lower 2 location tabs. BUT as mentioned they can burn out the dip switch = replacing switch gear. so the Relay mod is a must for peace of mind.
the mod linked is for a NC29s headlights... as that is what i own.. i dont know if the NC23 has the same set up.

http://i18.photobucket.com/albums/b145/ ... ghtMod.jpg" onclick="window.open(this.href);return false;
User avatar
lloydiecbr
Site Supporter
Site Supporter
Posts: 271
Joined: Fri Dec 26, 2008 11:11 pm
Bike owned: VTR1000
Location: coventry
Re: nc23 tri arm light head bulbs

Post by lloydiecbr »

thank you 2 . as im using my 600 loom witch is for uk bulbs i will get the dremal .
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: nc23 tri arm light head bulbs

Post by leopard_pagan »

PLEASE check that NC23 headlight units are similar or same as NC29 ones (in the pics) before you start cutting. if they arent the same.. at least the mod an be used as a guide..
User avatar
lloydiecbr
Site Supporter
Site Supporter
Posts: 271
Joined: Fri Dec 26, 2008 11:11 pm
Bike owned: VTR1000
Location: coventry
Re: nc23 tri arm light head bulbs

Post by lloydiecbr »

they look the same ish . im getting used to chopping jap things up !
Waza4
Settled in member
Posts: 176
Joined: Fri May 02, 2008 1:49 pm
Location: Devon
Re: nc23 tri arm light head bulbs

Post by Waza4 »

Don't go too deep or you'll screw up the beam angels.

Hows the rest of the bike looking.
User avatar
lloydiecbr
Site Supporter
Site Supporter
Posts: 271
Joined: Fri Dec 26, 2008 11:11 pm
Bike owned: VTR1000
Location: coventry
Re: nc23 tri arm light head bulbs

Post by lloydiecbr »

its been up dated . more pick on tuesday .
ya i think i will have to take my time when doing it :o

Post Reply