nc23 MOT how do u get it to pass?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: nc23 MOT how do u get it to pass?
rule of THUMB.... literally.
if your fingers get smushed by the handle bars against anything (nose cone or tank). its a MOT fail.
but 1 thing is certain about all MOT places. it all depends on the MOTer at the time..
if your fingers get smushed by the handle bars against anything (nose cone or tank). its a MOT fail.
but 1 thing is certain about all MOT places. it all depends on the MOTer at the time..
-
- Settled in member
- Posts: 137
- Joined: Fri Mar 20, 2009 9:10 pm
Re: nc23 MOT how do u get it to pass?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0113374214" onclick="window.open(this.href);return false;
this was the item.
I got sent one rotor and had a right dispute about it, and eventually got sent both the rotors after, under the grounds of compasion, (the seller said she had an ulcer and was stressed bla bla bla) I sent a further £7.
I needed the rotors for the mot so wanted to come to a compramise.
when they arived they were both cracked all over the place and thinnner than specified.
I have informed paypal and they are not interested as i recieved the item?
I will look into reporting it to trading standards as someone could get killed if these are dangerous.
cheers guys.
hope it was ok to put the link on here?
this was the item.
I got sent one rotor and had a right dispute about it, and eventually got sent both the rotors after, under the grounds of compasion, (the seller said she had an ulcer and was stressed bla bla bla) I sent a further £7.
I needed the rotors for the mot so wanted to come to a compramise.
when they arived they were both cracked all over the place and thinnner than specified.
I have informed paypal and they are not interested as i recieved the item?
I will look into reporting it to trading standards as someone could get killed if these are dangerous.
cheers guys.
hope it was ok to put the link on here?

-
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: nc23 MOT how do u get it to pass?
item description:-
1988 MODEL.
GENUINE ORIGINAL HONDA.
TWO AVAILABLE.
STRAIGHT AND UNBENT, NO CRACKS OR WARPS, GOOD CONDITION.
hmmmm id open a dispute on ebay if PP arent interested (sounds normal!)
mind you from the comments left on the neutral/negative feedback they/she sounds like a Plum!
1988 MODEL.
GENUINE ORIGINAL HONDA.
TWO AVAILABLE.
STRAIGHT AND UNBENT, NO CRACKS OR WARPS, GOOD CONDITION.
hmmmm id open a dispute on ebay if PP arent interested (sounds normal!)
mind you from the comments left on the neutral/negative feedback they/she sounds like a Plum!
-
- Settled in member
- Posts: 137
- Joined: Fri Mar 20, 2009 9:10 pm
Re: nc23 MOT how do u get it to pass?
i hope ebay will be more interested.
just been out on a test ride, after changing forks seals and pads.
its raining and the brake was not bedding in, suddenly it locked up! some swerving about and a bruised leg, i managed to not drop it lol.
it turns out the first set of seals i fitted (with a screw driver) have been damaged. the 2nd set i just fitted are fine.
I luckily ordered new seals again estimating my 1st method may have caused some damage.
roll on mot.
just recieved my 'as new' tyre which lookeslike it has been involved in a crash from the side scrapes, and has little stones in it.
wow im raking in these ebay bargains lol.

just been out on a test ride, after changing forks seals and pads.
its raining and the brake was not bedding in, suddenly it locked up! some swerving about and a bruised leg, i managed to not drop it lol.
it turns out the first set of seals i fitted (with a screw driver) have been damaged. the 2nd set i just fitted are fine.
I luckily ordered new seals again estimating my 1st method may have caused some damage.
roll on mot.
just recieved my 'as new' tyre which lookeslike it has been involved in a crash from the side scrapes, and has little stones in it.
wow im raking in these ebay bargains lol.
