Clutch issue?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
manicguitarist
NWAA Supporter
NWAA Supporter
Posts: 355
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire
Clutch issue?

Post by manicguitarist »

For info - bike is running fine, accelerates fine - no slippage, gears change fine.

That all said, the clutch feels odd. It feels like the lever isn't springing back fully, it feels "mushy" when I pull it in - it disengages ok - but, especially when engine hot, it just feels odd.

Not a lot of symptoms to work with, but any suggestions?
dgunthor
Settled in member
Posts: 167
Joined: Wed Jan 21, 2009 4:48 pm
Re: Clutch issue?

Post by dgunthor »

it's just an inner cable inside a outer cable - could oil the cable (might be feeling rough), could remove the infill panel on the LHS where you can see the clutch cable attach - maybe it needs cable adjustment? (should be able to see at what point of the lever pull the mechanism starts to move
manicguitarist
NWAA Supporter
NWAA Supporter
Posts: 355
Joined: Mon Oct 06, 2014 11:39 am
Bike owned: RVF400 (NC35)
Location: Rossendale, Lancashire
Re: Clutch issue?

Post by manicguitarist »

I will check that out.
It is a new clutch cable - because I felt the issue coming on and thought it was the clutch cable. I didn't oil the cable though...just replace it.

M
Dynamohum
Site Supporter
Site Supporter
Posts: 780
Joined: Sun May 04, 2008 9:07 am
Location: glasgow
Re: Clutch issue?

Post by Dynamohum »

You could try checking the operation of the arm on the cover that works the pushrod an accumulation of old chain lube gunge grit possibly ?

Post Reply