rvf float bowls

richyrd5 · Post by **richyrd5** » Fri Jan 08, 2016 10:59 am

what is the correct position of float bowls..drain screws facing in or out...seems to be differing opinions..for nc30/35.

Post by **Drunkn Munky** » Sat Jan 09, 2016 8:37 am

Should be facing in as it allows them to be accessed on the bike however in all the years ive had NC's ive never needed to access them so i have mine facing out as it just makes more sense to me when draining them off the bike.

richyrd5 · Post by **richyrd5** » Sat Jan 09, 2016 9:06 am

thanks..yes all the ones ive seen seem to be always facing out...like you said you would need access when there off the bike..you wouldnt drain them on the bike!!!.obviously it doesnt affect the operation of the carbs whichever way the bowls are on..

Post by **Drunkn Munky** » Sat Jan 09, 2016 9:18 am

Its so the bowls can be emptied before storage etc without removing them

richyrd5 · Post by **richyrd5** » Sun Jan 10, 2016 12:22 am

easier to run it dry!!

Post by **Neosophist** » Sun Jan 10, 2016 5:13 pm

richyrd5 wrote:easier to run it dry!!

usualyl itll cut out before the floats are totally empty

rvf float bowls

rvf float bowls

Re: rvf float bowls

Re: rvf float bowls

Re: rvf float bowls

Re: rvf float bowls

Re: rvf float bowls