NC35 Emulsion Tubes

[911f]

thank you guys for closing the loop on this. JB brought up the question to me because his were differently installed and I couldn't be 100% sure. I just went back and checked mine and it had the right-side 2 carbs one way and the left-side two the opposite way! I randomly picked the right ones for the picture! So someone else had been there before me and put them back in differently. that is my story anyway.

[Cammo]

Yeah mate it happens all the time when previous owners fiddle with the carbs!

The nc30 also has different tubes front and rear.

[Neosophist]

Yeah mate it happens all the time when previous owners fiddle with the carbs!

And they ignore the good old advice of working on one carb at a time.

I'm sure thats written in at least one of the manuals.

[kurt2055]

Hey Guys i have recently bought a RVF 400 1997 Model back off a "Small Motor Mechanic" and seems he has ran all rear Emulsion Tubes in the bike while i understand there to be a difference and the slinger holes hight as pictured earlier in this Thread. Dose anyone have part numbers floating around for this tubes front/rear would be greatly appreciated. Also he is running 108 Main jets all around , are the two main jets different that thread into the different emulsion tubes or are they all the same ?

Cheers Kurt

[richyrd5]

standard rvf jets are 108(read my other thread on here),standard emulsion tubes are 3 hole front and rear but DO go in different carbs,

[RickOliver]

I have new standard type emulsion tubes in stock for both NC30 and NC35 if you need them, also main jets and pilot jets...

ricknc30@gmail.com

Rick