Nc 30 regulator end

Bogs1980 · Post by **Bogs1980** » Thu Apr 23, 2015 10:46 pm

Hi all my regulator/rectifier on my nc30 quad has decided to cook it self in to a mess. I have stripped the wires and extended them also new spade connectors with heat shrink.
The problem I have is the three yellow wires do they just go in a certain connector in the rectifier or does it not matter as long as three yellow wires are at top?? Many thanks

Post by **Malc** » Fri Apr 24, 2015 8:53 am

Three wires can go into any of the three connection holes, it's a three-phase supply.

Bogs1980 · Post by **Bogs1980** » Fri Apr 24, 2015 9:11 am

Thank you ever so much I was afraid to plug in to rectifier .thank you

Post by **Neosophist** » Sat Apr 25, 2015 11:42 am

Bogs1980 wrote:Thank you ever so much I was afraid to plug in to rectifier .thank you

these connectors must be soldered too, criming them will make them set-fire as soon as any corssion builds up as they carry a lot of current.

corrosion on these terminals is usually the reason they melt in the first place as they get hot.

Nc 30 regulator end

Nc 30 regulator end

Re: Nc 30 regulator end

Re: Nc 30 regulator end

Re: Nc 30 regulator end