GK73A front sprocket
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
bluex5
- Settled in member
- Posts: 16
- Joined: Sat Feb 07, 2015 5:20 pm
GK73A front sprocket
I've been preparing my gk73 frame to go for welding on the broken engine mount, the guy wants the engine so he can check his work after doing the repair, so i've been refitting the sprocket cover so i don't lose the clutch pushrod etc. I've noticed the front sprocket is quite sloppy on the shaft. I'm not sure how much slop is too much, i appreciate it's a floating design with just a circlip. The splines on the shaft don't look too hammered, is it worth changing the front sprocket for a new one and hoping this takes up some of the slop?
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: GK73A front sprocket
A new sprocket should help a bit but they are a pretty loose fit.
-
bluex5
- Settled in member
- Posts: 16
- Joined: Sat Feb 07, 2015 5:20 pm
Re: GK73A front sprocket
CheersVariablevalves suck wrote:A new sprocket should help a bit but they are a pretty loose fit.
i somehow thought that might be the case, bit heath robinson but if thats how they are...