VFR400 NC30 Standard System
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
TauntFate
- Settled in member
- Posts: 2
- Joined: Sun Mar 22, 2015 4:56 pm
- Bike owned: NC30/GSXR600/CRF250
- Location: Essex
- Contact:
VFR400 NC30 Standard System
Hi All,
Im looking to put an aftermarket system on my viffer, obviously avoiding chopping up the standard one, only issue is my original can has some scuffing from what looks like a stationary/slow speed spill.
Is it still worth anything with that being the case? (I'll try and add some pics later on) - If it's not then I don't see the need to keep it as it is and may as well opt for modifying that rather than buying the half system.
Cheers,
Dean.
Im looking to put an aftermarket system on my viffer, obviously avoiding chopping up the standard one, only issue is my original can has some scuffing from what looks like a stationary/slow speed spill.
Is it still worth anything with that being the case? (I'll try and add some pics later on) - If it's not then I don't see the need to keep it as it is and may as well opt for modifying that rather than buying the half system.
Cheers,
Dean.
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: VFR400 NC30 Standard System
They are always worth something.
But it will depend on condition.
But it will depend on condition.
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: VFR400 NC30 Standard System
I've sold cut standard systems for £50 and a mint system for £200 so there is a value to it
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: VFR400 NC30 Standard System
Christ, I gave a totally unmarked, unrusted standard system away last week, copmlete with front pipes and stubby header.marcus57 wrote:I've sold cut standard systems for £50 and a mint system for £200 so there is a value to it
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
richyrd5
- Regular Member
- Posts: 743
- Joined: Fri Feb 21, 2014 1:31 pm
Re: VFR400 NC30 Standard System
got any more neo!!
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: VFR400 NC30 Standard System
sorry fella, only had the one i was keeping it as it was the most pristine one ive ever seen barring a factory fresh system, no rust on the joints.richyrd5 wrote:got any more neo!!
but you can really feel the bike being stranglled compared to an aftermarket system and upset so it was just sleeping under a blanket.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
Icemaestro
- Familiar Member
- Posts: 331
- Joined: Wed Nov 27, 2013 6:45 am
Re: VFR400 NC30 Standard System
I have one here that I've just removed, a little far away though! No corrosion at all, didn't even need crc to get it off!
-
richyrd5
- Regular Member
- Posts: 743
- Joined: Fri Feb 21, 2014 1:31 pm
Re: VFR400 NC30 Standard System
lol,cheers neo,and icemaestro,yup a bit far for postage chap!but think im sorted now though chers.