Bike won't start please help

[Weeman1234]

Hi I have a vfr400 nc30 my problem is it won't start there is zero power to the bike I rode it the other day all was fine got it out today and It won't start iv charged the batterie checked all fuses and wires seem fine but still nothing I have no lights or any thing please help

[bikemonkey]

Have you checked the main fuse in the starter solenoid?

Killswitch isn't in the off position is it? (we've all done it)

[Weeman1234]

Yea checked ever fuse on the bike and yea Iv done it before spent a long time trying to start it to fined I had it off lol

[CMSMJ1]

Have you tried jump leads? This will let you see if it is dead - fuses or what - or you can bump it.....

My money, if it was working fine, is on a flat battery

[Weeman1234]

Iv tried bump starting it nothing and Also put the batterie on charge still nothing

[CMSMJ1]

So - key in, turn it - no idiot lights at all?

100% checked the main fuse under the right hand seat panel? it is a 30a jobby..not one of the ones under pillion seat?

[Morespeedvicar]

You have to get a multimeter and check the battery voltage with the ignition off and on.
Cheers
Ian

[Weeman1234]

Silly question check it where

[CMSMJ1]

on the pos and neg on the battery itself...

reading with it off - should be more than 13v
then switch on...

[Weeman1234]

Ok thank you