1/4 turn fastener tab

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
shaneo
Settled in member
Posts: 23
Joined: Mon May 20, 2013 5:34 am
Bike owned: ZX7r Tracky, RVF400
Location: Melbourne, Australia
Re: 1/4 turn fastener tab

Post by shaneo »

krisztian_andre wrote:
Cammo wrote:The original honda dzus fasteners (if that's what you're replacing) are a unique size, the kit above is a different size so unless you replace all 4 you'll have 1 odd looking fastener.
I measured the original ones and they are 6x13mm, same as the ones on ebay. Do you mean the backplate is different?
they also use a different "thread" to grip onto the back plate.

i just put a set of these through my bike http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 1166806851
Top
Post Reply

Return to “Honda - Workshop”