Rev counter still not working.

wambam87 · Post by **wambam87** » Fri Aug 30, 2013 6:27 pm

After some help from my dad, I have 13v ish at my tachometer, and 0.5 volts from the signle wire. Are these values enough? Or is my new tacho dead too?

Post by **Cammo** » Fri Aug 30, 2013 11:41 pm

Are you sure you have the correct tacho for the bike? Rvf and vfr are not interchangeable.

On the rvf tacho 0 rpm is in the 6 o'clock position, on VFR tacho it's around the 4 o'clock position.

magg · Post by **magg** » Fri Aug 30, 2013 11:57 pm

12 volts

Post by **Neosophist** » Sat Aug 31, 2013 3:57 am

Cammo wrote:Are you sure you have the correct tacho for the bike? Rvf and vfr are not interchangeable.

On the rvf tacho 0 rpm is in the 6 o'clock position, on VFR tacho it's around the 4 o'clock position.

This is important.

You cant use the wrong tacho :)

wambam87 · Post by **wambam87** » Sat Aug 31, 2013 9:14 am

Have checked and there exactly the same. There's a "working" tachometer on ebay at the moment, going to see if I can nab it.

Post by **Cammo** » Sun Sep 01, 2013 1:49 am

Do you have the earth wire screwed onto the back of the tacho?

Rev counter still not working.

Re: Rev counter still not working.

Re: Rev counter still not working.

Re: Rev counter still not working.

Re: Rev counter still not working.

Re: Rev counter still not working.

Re: Rev counter still not working.