Fairing repair

[benny]

Thank you fellas, I'll be sure to order the kit tomorrow and have a crack at it.
How would I build up the bit missing part as there's about 3 inches missing. Would it be a case of putting tape on the inside of the panel , shape it and build up layers?
Your help is really appreciated

You'll be best if you can take a mould off of someone else's panel, I would let you use mine but seems silly you coming all this way. Maybe post another thread asking if anyone will give you a hand? I think DM is near you

[Evilchicken0]

Put the tape on the outside off the panel and fill into it. It would be easier if you could take a mould from an undamaged fairing though. Tape on the outside means you don't have to sand back on what will be the face side of the panel

[Drunkn Munky]

Ade, I have a couple of plastex kits so should have enough moulding putty to make a mould. I think I've only got a fiberglass nc30 nosecone but you should be able to get the right shape from it.

[Triplespeed]

Nice one Tony, I'm working my last night shift tonight so I'll have a few days free after.

Thank you for your help fellas, it's awesome and I'm most grateful