starting porbs , HELP !!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 32
- Joined: Fri May 02, 2008 9:15 am
- Location: Portsmouth
starting porbs , HELP !!
ok well the RVF was running fine up until a few weeks ago when it started to have well erm starting problems , originaly put thought it may be the battery but put it on the optimate and everything there is fine , so maybe the plugs ? nope 75notes on plugs anad filters and still no change , the damn thing just wont start , HELP !!
-
- Settled in member
- Posts: 32
- Joined: Fri May 02, 2008 9:15 am
- Location: Portsmouth
Re: starting porbs , HELP !!
and ive just realised ive put it in the genral chat and not mecanical
sorry
sorry

-
- Site Supporter
- Posts: 246
- Joined: Thu May 22, 2008 8:04 pm
- Contact:
Re: starting porbs , HELP !!
you checked the starter itself?
- CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: starting porbs , HELP !!
yeah, what does it do..or not do?
Does it spin up and try to start?
KILL SWITCH
Does it spin up and try to start?
KILL SWITCH

IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- Settled in member
- Posts: 32
- Joined: Fri May 02, 2008 9:15 am
- Location: Portsmouth
Re: starting porbs , HELP !!
ok , havnt checked the starter but the bike does actualy start sometimes , but if it doesnt start on the 1st attemp then it wont start at all
so maybe still the starter ?
and its not the kill switch
been there done that b4 , with a rs125 left it at my mates for over a week as it wouldnt start and went back with new plugs only to look down and see the kill switch 
so maybe still the starter ?
and its not the kill switch


-
- Settled in member
- Posts: 34
- Joined: Thu Jun 26, 2008 11:43 pm
- Location: Belfast, N.I.
- Contact:
Re: starting porbs , HELP !!
Bump start??
-
- Site Supporter
- Posts: 246
- Joined: Thu May 22, 2008 8:04 pm
- Contact:
Re: starting porbs , HELP !!
maybe the sidestand switch??
-
- Settled in member
- Posts: 32
- Joined: Fri May 02, 2008 9:15 am
- Location: Portsmouth
Re: starting porbs , HELP !!
havnt tried bump starting it yet as i didnt think it was a good idea being stone cold but i'll give it ago tomorrow.
how do i check if its the side stand switch ? any way of disconnecting it
how do i check if its the side stand switch ? any way of disconnecting it
-
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: starting porbs , HELP !!
It's only two wires, when the side-stand is down they are either connected or not connected... so either join them together or remove them from the swithc to isolate..
i'll check mine later if you still havn't sussed it out :)
i'll check mine later if you still havn't sussed it out :)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
- Settled in member
- Posts: 32
- Joined: Fri May 02, 2008 9:15 am
- Location: Portsmouth
Re: starting porbs , HELP !!
the more i think about it the more it sounds like something worng with the kill switch or the like as when you try to start it its like the kill switch is flicked but then why would it start sometimes
im in no way mecanicly minded so im just guessing and staring at the haynes with a glazed look in my eye's

im in no way mecanicly minded so im just guessing and staring at the haynes with a glazed look in my eye's
