vfr single sided swingarm on a nc23
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
amorti
- Regular Member
- Posts: 957
- Joined: Sun May 18, 2008 4:51 pm
- Bike owned: CB-1, MSX125
- Location: Gibraltar
Re: vfr single sided swingarm on a nc23
In case you missed it, this will be the bit which causes a headache.Jon wrote:NC30 and NC35 swingarms are different, not sure which will be closer to the NC23 dimensions.
The shock is offset to the left on both of them to give exhaust clearances
jon.
regard
You might be better off trying a Bros swingarm, though you would have to use a direct-linked suspension so you'd need a compatible shock. At least that has the shock mounted in the centre of the arm. Maybe the earlier VFR (21,24) arms would be a closer fit?
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: vfr single sided swingarm on a nc23
The '21 has a conventional swingarm, the '24 single sider will only take a 140 sized tyre so you'd be going backwards regarding sports tyre choices etc, and would have to use the '24 wheel.amorti wrote:Maybe the earlier VFR (21,24) arms would be a closer fit?
"It's just a ride" Bill Hicks
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: vfr single sided swingarm on a nc23
hmmmmmmmm........ 