Yoke, Clipons, Lever perches and other colours?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa
Yoke, Clipons, Lever perches and other colours?

Post by tigerclaw »

Hi, I found another thread where it said that "Yoke and lever perches satin black.clipons gloss black." but what about the actual handle bars (they look gloss black to me?) and the metal throttle cable housing (toss up between satin black and gloss black?) then what colour should the brake fluid reservoir bracket be (in my opinion gloss black against the satin black will look good?) lastly what colour is the key / lock cap (ie the surround around the key that says on off etc) - again I think gloss black as a contrast against the satin black will look good... all these bits are going to the powdercoaters on tuesday so hopefully someone has some info for me before it goes otherwise thats whats going to happen :lol:
User avatar
VFRkieran
Site Supporter
Site Supporter
Posts: 839
Joined: Fri May 06, 2011 8:37 pm
Bike owned: NC30, NSR250, CBR600, TS125
Location: Oxfordshire
Re: Yoke, Clipons, Lever perches and other colours?

Post by VFRkieran »

Pretty sure the handle bars are gloss black too, metal throttle cable housing (if im thinking of the correct thing) should be zinc coated in the olive green colour thats a nightmare to match properly, same with the M/C bracket but ive just painted that satin.
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa
Re: Yoke, Clipons, Lever perches and other colours?

Post by tigerclaw »

Thanks, it all prepped for the powdercoating shop tomorrow ... quite a mission... amazing how many holes need to be filled with an old bolt to make sure the powercoating doesnt clog the threads (also quite a story to strip and blank off the master cylinder on the brake lever)... anyway... its going to be pretty when its done 8-) .
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa
Re: Yoke, Clipons, Lever perches and other colours?

Post by tigerclaw »

Next colour question... dont know what the part is called but the metal section that sits inside the sprocket (the sprocket fastens to it and it fastens to the rear wheel)... its black but mine is faded - what colour black is it supposed to be? Thanks
hunter
Site Supporter
Site Supporter
Posts: 1292
Joined: Thu Nov 20, 2008 1:09 pm
Re: Yoke, Clipons, Lever perches and other colours?

Post by hunter »

Satin.
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa
Re: Yoke, Clipons, Lever perches and other colours?

Post by tigerclaw »

Thanks man - I was feelin a little ignored ;)
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: Yoke, Clipons, Lever perches and other colours?

Post by Drunkn Munky »

I wouldn't powdercoat the clip on bars, the throttle tube wont go back over.
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa
Re: Yoke, Clipons, Lever perches and other colours?

Post by tigerclaw »

Thanks Dave, I have taped up the bars, will be spray / can painting that bit
tigerclaw
Familiar Member
Posts: 290
Joined: Tue Feb 05, 2013 5:52 pm
Location: South Africa
Re: Yoke, Clipons, Lever perches and other colours?

Post by tigerclaw »

My bike is a 92 - black calipers... But what black? I am guessing they should be satin black (with white nissin lettering?) - does anyone know? Thanks

Post Reply