Wheel painting

Post by **Drunkn Munky** » Mon Sep 10, 2012 6:50 pm

Not today mate but im sure there be here tomorrow

Post by **iDemonix** » Mon Sep 10, 2012 9:38 pm

I re-assembled, but the spacer on the R/H side of the bike is poking out a lot more, I thought it was wrong but the brake discs seem to be equally spaced from the forks. Can someone confirm this is right?

Post by **Hadies** » Mon Sep 10, 2012 9:48 pm

I don't understand. One of the spacers is larger and does stick out more than the other side - this is normal.

Post by **iDemonix** » Tue Sep 11, 2012 8:09 am

That's all I wanted to know, I didn't really pay attention to how it looked before dismantling, thanks.

Post by **tillett22** » Tue Nov 06, 2012 3:20 pm

what powder coat place did you use. maybe helpful for people using the same place.

Post by **porndoguk** » Tue Nov 06, 2012 4:40 pm

tillett22 wrote:what powder coat place did you use. maybe helpful for people using the same place.

He used one over in Notts,

However tillet there's a brilliant one in Rugeley called Marmo Coatings, speak to mark and tell him Ricky sent you.

Post by **tillett22** » Thu Nov 08, 2012 9:12 am

porndoguk wrote:
tillett22 wrote:what powder coat place did you use. maybe helpful for people using the same place.
He used one over in Notts,

However tillet there's a brilliant one in Rugeley called Marmo Coatings, speak to mark and tell him Ricky sent you.

Ow cheers for that Rick, I will do that

Wheel painting

Re: Wheel painting

Re: Wheel painting

Re: Wheel painting

Re: Wheel painting

Re: Wheel painting

Re: Wheel painting

Re: Wheel painting