A 4 into 4 exhaust system possible?

xivlia · Post by **xivlia** » Thu Apr 12, 2012 5:29 pm

oh no im having cans on them obviously :), 225mm carbon stubby, on each of the pipes.

Post by **CMSMJ1** » Thu Apr 12, 2012 5:33 pm

what diameter? Have to be small I reckon.

You don't need the weight hanging off the pipes do you really?

xivlia · Post by **xivlia** » Thu Apr 12, 2012 6:27 pm

110mm standard size, and no i dont want it hanging down. hence the smaller size. ive got one carbon can at 225mm and they are quite fantastic in weight imo.

Post by **thunderace** » Thu Apr 12, 2012 7:27 pm

Good luck getting two 4 1/2" diameter silencers underseat

xivlia · Post by **xivlia** » Thu Apr 12, 2012 7:30 pm

thunderace wrote:Good luck getting two 4 1/2" diameter silencers underseat

yeah, thats what i was thinking too... but il figure out a way.. i might not have them right under the seat, but somewhere around there.

Post by **thunderace** » Thu Apr 12, 2012 7:43 pm

It'll look more bulbous than a fugly SRAD

How about just having a concealed oval silencer with two outlet pipes? Effectively a 2-1-2 system.

xivlia · Post by **xivlia** » Thu Apr 12, 2012 7:45 pm

hmm maybe..., but i will have to decide on it. itl be a while before i decide on anything.

Post by **micpec** » Thu Apr 12, 2012 9:04 pm

It is not simply done by putting a long or shorter cans on a piece of exhaust tubing. Maybe the looks are okay but every system requires an correct calculation, so do the math, do the research, you will then understand that it is not an simple job.

A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?

Re: A 4 into 4 exhaust system possible?