NC30 related questions
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
mattiec321
- NWAA Supporter
- Posts: 109
- Joined: Sun Oct 30, 2011 2:39 pm
- Bike owned: GSXR1000K7 Monster HondaPX50
- Location: Strood, Kent
NC30 related questions
Guys.
I am in the process of putting right all of the bodges previous owners have made to the NC30 I now own.
Having had the carbs off and found that some numpty had diagonally mixed up the emulsion tubes and jets.
This bike is running the 115/118 set up. Also whilst looking at the needles somebody had, on the rear carbs but 6! .5mm washers on them. God knows why.... The fronts had 3 each. I have changed them to 2 as per the jetting guide found on this forum.
I havn't as yet drilled the slides. Does it really make that much difference?
I have noticed that the rear suspension resevior is suspended inder the battery tray by cable ties. Surley this can't be right..
Can anybody send me a picture of where is should be located.
Thanks All
I am in the process of putting right all of the bodges previous owners have made to the NC30 I now own.
Having had the carbs off and found that some numpty had diagonally mixed up the emulsion tubes and jets.
This bike is running the 115/118 set up. Also whilst looking at the needles somebody had, on the rear carbs but 6! .5mm washers on them. God knows why.... The fronts had 3 each. I have changed them to 2 as per the jetting guide found on this forum.
I havn't as yet drilled the slides. Does it really make that much difference?
I have noticed that the rear suspension resevior is suspended inder the battery tray by cable ties. Surley this can't be right..
Can anybody send me a picture of where is should be located.
Thanks All
-
MexicanGringo
- Familiar Member
- Posts: 315
- Joined: Sun May 25, 2008 10:41 am
- Bike owned: '30
- Location: Durban, RSA
Re: NC30 related questions
Reservoir is supposed to have hose clamps clamping it to a bracket, which is bolted to right hand side pillion footpeg
-
mattiec321
- NWAA Supporter
- Posts: 109
- Joined: Sun Oct 30, 2011 2:39 pm
- Bike owned: GSXR1000K7 Monster HondaPX50
- Location: Strood, Kent
Re: NC30 related questions
thats great. but i have no bracket there. could anyone podt a pic for me so i can see what im missing. thanks.
-
CRM
- Admin NWAA
- Posts: 2972
- Joined: Sat Apr 05, 2008 2:06 pm
- Location: NorthWest
- Contact:
Re: NC30 related questions
leave the slides alone, seriously i have never found it improve or make any noticable improvement on any of mine in the past.
Insert Signature Here
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC30 related questions
CRM wrote:leave the slides alone, seriously i have never found it improve or make any noticable improvement on any of mine in the past.
Me neither...
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
mattiec321
- NWAA Supporter
- Posts: 109
- Joined: Sun Oct 30, 2011 2:39 pm
- Bike owned: GSXR1000K7 Monster HondaPX50
- Location: Strood, Kent
Re: NC30 related questions
Excellent. I will leave the slides then. Im still lost about this.resevoir. Oh and is the jetting ok to leave or should. I up them to uk spec?