Swingarm/Proarm Nut
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Swingarm/Proarm Nut
This anygood?
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
roadrash
- Settled in member
- Posts: 8
- Joined: Fri Aug 01, 2008 1:35 pm
Re: Swingarm/Proarm Nut
The swingarm pivot bolt on the right hand side of the bike is a 27mm the left hand side is a 14mm hex key locked in by the largest of the castle nuts.
When removing mine the alloy corrosion left the nut tight to the frame and the only thing needed to remove the pivot arm was the allen key once the castle was removed. :)
When removing mine the alloy corrosion left the nut tight to the frame and the only thing needed to remove the pivot arm was the allen key once the castle was removed. :)