rvf trackbike dash problems

buntz · Post by **buntz** » Wed Feb 16, 2011 9:17 pm

hi all i'm looking to swap the stock (damaged) speedo tacho and temp gauge for an aftermarket (alfano) digital dash.
i had all kinds of problems with my 3tj and removing the speedo, does anyone know what i'm likely to run into on the rvf?
cheers buntz

Post by **Drunkn Munky** » Wed Feb 16, 2011 9:20 pm

dead easy mate, all digital dashes ive come across work straight off the cdi

buntz · Post by **buntz** » Wed Feb 16, 2011 9:23 pm

the problem i had before was with the bike registering that the speedo was missing and restricting the power after second gear, finally cured it with an m max type box, wondering if the honda will be the same?

Post by **Drunkn Munky** » Wed Feb 16, 2011 9:26 pm

No need for the m max box you just need to connect the rev limit wire from the cdi to a +12v source if you remove the speedo

buntz · Post by **buntz** » Wed Feb 16, 2011 9:29 pm

ideal, now to save a search does anyone know which wire this is from the cdi? i know it'll be on here somewhere but any pointers much welcomed

Post by **Drunkn Munky** » Wed Feb 16, 2011 9:31 pm

Orange with a blue tracer

Post by **CMSMJ1** » Wed Feb 16, 2011 9:37 pm

LOL - you are good DM

buntz · Post by **buntz** » Wed Feb 16, 2011 9:50 pm

thanks mr munky you are a gent
i'll let you know how it goes
buntz

Post by **Drunkn Munky** » Wed Feb 16, 2011 9:50 pm

Been there done it

rvf trackbike dash problems

rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems

Re: rvf trackbike dash problems