600 supermono

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
abrmoto
Moderators
Moderators
Posts: 728
Joined: Wed Apr 30, 2008 10:52 pm
Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
Location: Wigan
Contact:
Contact abrmoto
Re: 600 supermono

Post by abrmoto »

:up: I like this!!
Top
Dgeoff33
NWAA Supporter
NWAA Supporter
Posts: 342
Joined: Wed Apr 30, 2008 3:46 pm
Bike owned: RVF400 - ZX636
Location: doncaster
Re: 600 supermono

Post by Dgeoff33 »

marcus57 wrote:top work , will be keeping a eye on this :up:
Me too
Top
User avatar
mattUKNC
NWAA Supporter
NWAA Supporter
Posts: 1075
Joined: Thu May 01, 2008 9:02 am
Bike owned: Fury, NC30, CRF250L and a C90!
Location: Surrey
Re: 600 supermono

Post by mattUKNC »

That looks like it fits pretty well and doesn't look too out of place. :grin: Nice work.
Image
Top
User avatar
brooky
Site Supporter
Site Supporter
Posts: 214
Joined: Tue May 20, 2008 11:29 pm
Bike owned: cbr400,vfr400,crf250,ktm200exc
Location: Heysham
Contact:
Contact brooky
Re: 600 supermono

Post by brooky »

nice project, fancy something along these lines
Vinylmark signs - for all your bike, car, van, vinyl needs, one off tshirts also printed.
http://www.vinylmarksigns.co.uk" onclick="window.open(this.href);return false; email sales@vinylmarksigns.co.uk
Top
User avatar
blodnob
Site Supporter
Site Supporter
Posts: 33
Joined: Sat Oct 02, 2010 11:59 pm
Re: 600 supermono

Post by blodnob »

Had a bit of a closer look and the sprocket hieght was a little low so i'll have to have the engine tiped down a little to bring it into line.
I'll make the engine mounts up soon and get them tacked on. No need to make em permanent as i'm just using this frame to mock it all up.
I'll get a frame with log book etc and it could end up on the road.

Image

Engine angles not to critical as its a dry sump engine.
Top
User avatar
blodnob
Site Supporter
Site Supporter
Posts: 33
Joined: Sat Oct 02, 2010 11:59 pm
Re: 600 supermono

Post by blodnob »

Just foud a big bore Wiseco piston on Ebay :P
I have a new 680 liner, new con rod and gasket set. Need bearings and a cam then the lumps finished.
May try bigger carbs once its running.
Build a better mousetrap, and the world will beat a path to your door.
http://s705.photobucket.com/albums/ww59/blodnob/
Image
Top
marcus57
Site Supporter
Site Supporter
Posts: 1142
Joined: Sun Jul 04, 2010 1:21 pm
Bike owned: nc30, nc35, gsxr750
Location: Taunton
Re: 600 supermono

Post by marcus57 »

what sort of bhp will it make?
Top
User avatar
alexwitham
Site Supporter
Site Supporter
Posts: 1340
Joined: Wed May 20, 2009 10:04 pm
Bike owned: 675R, GSXR6, NC30
Location: Norwich
Re: 600 supermono

Post by alexwitham »

I'll have a stab in the dark at 65hp
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: 600 supermono

Post by Cammo »

I'll guess 50hp?! ;)
"It's just a ride" Bill Hicks
Top
User avatar
blodnob
Site Supporter
Site Supporter
Posts: 33
Joined: Sat Oct 02, 2010 11:59 pm
Re: 600 supermono

Post by blodnob »

I'm after between 55-60.
Dont know what the total weight will be but again i'm being ambitious and want it around 110kg max.
Friend of mine used to race supermono's and when he built em he'd be looking at keeping it under 100kg's.
I cant afford the carbon bodywork. But fibreglass is still fairly light.
I know there's a bit of stuff still to be bolted on, but at the moment i can still lift it clean off the floor without much effort.
I got a 10.5-1 HC Wiseco piston last night from ebay. :grin:
Got to get some more stuff made n sold now to pay for the rest of it.
Later, Sean
Build a better mousetrap, and the world will beat a path to your door.
http://s705.photobucket.com/albums/ww59/blodnob/
Image
Top
Post Reply

Return to “Honda - General”