600 supermono
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
blodnob
- Site Supporter
- Posts: 33
- Joined: Sat Oct 02, 2010 11:59 pm
600 supermono
Not sure if this is the right section to post about non V4 stuff. Sure some1 'll let me know if it's not.
Anyhoo.
I started a few weeks ago building a supermono trackday bike. I got an NC30 frame n back end, and RVF frontend.
Stilll waiting for the new (07) CBR,rr rear shock. SP1 front calipers n few other biits from a luverly chaps from here (cheers Pug' ,Geoff)
Engines a bit of a compromise. I want as much power as i can get from a big single. But cash is always the deciding factor on these things.
I ended up with an XR600 for a song. £30
.
Got to shoe horn it in some how now.
Needs a bit of a rebuild. But nothing i wouldn't ve changed anyhoo. New rod, bearings piston etc. May big bore it to 660 yet. And a hot cam is on the cards.
Bit of a mix n mach at the moment
Al be using the Honda RS250 RSW race bodywork. ( Danny Pedrosa sty'lee)
Nowt fancy.
Al keep updating as i go along if any ones still awake.
Laters, Sean.
Anyhoo.
I started a few weeks ago building a supermono trackday bike. I got an NC30 frame n back end, and RVF frontend.
Stilll waiting for the new (07) CBR,rr rear shock. SP1 front calipers n few other biits from a luverly chaps from here (cheers Pug' ,Geoff)
Engines a bit of a compromise. I want as much power as i can get from a big single. But cash is always the deciding factor on these things.
I ended up with an XR600 for a song. £30
.Got to shoe horn it in some how now.
Needs a bit of a rebuild. But nothing i wouldn't ve changed anyhoo. New rod, bearings piston etc. May big bore it to 660 yet. And a hot cam is on the cards.
Bit of a mix n mach at the moment
Al be using the Honda RS250 RSW race bodywork. ( Danny Pedrosa sty'lee)
Nowt fancy.
Al keep updating as i go along if any ones still awake.
Laters, Sean.
-
superlite
- Site Supporter
- Posts: 748
- Joined: Wed Apr 30, 2008 11:52 pm
- Bike owned: TLS, LB80 x 2
- Location: Australia
- Contact:
Re: 600 supermono
Sounds like a very nice project! You had me at "Honda RS250 RSW race bodywork" 
'Take it to the Back'
-
RoninZX-10R
- Settled in member
- Posts: 216
- Joined: Tue Jul 07, 2009 1:50 am
- Bike owned: NC35 racebike, ZX10R roadbike
- Location: Melbourne, Australia
Re: 600 supermono
Nice. Can't wait to see what it looks like with the RS250 fairing.
-
blodnob
- Site Supporter
- Posts: 33
- Joined: Sat Oct 02, 2010 11:59 pm
Re: 600 supermono
Should have the fairing and seat next week.
Gunna take a bit ov time to get all me bits together. It was gunna be my X'mas holiday project as i have all my holl's at Crimbo'. About 6 weeks off.
But cant seem to stop building it now.
I only use garage money to do my little projects. Wifey says wages is for bills. I hate wasting money on bills.
Fancy an under seat exhaust or belly exit.
Seen this on ebay. Sure i can get it to fit somewhere.
ebay no' 130440950657.
Sean.
Gunna take a bit ov time to get all me bits together. It was gunna be my X'mas holiday project as i have all my holl's at Crimbo'. About 6 weeks off.
But cant seem to stop building it now.
I only use garage money to do my little projects. Wifey says wages is for bills. I hate wasting money on bills.
Fancy an under seat exhaust or belly exit.
Seen this on ebay. Sure i can get it to fit somewhere.
ebay no' 130440950657.
Sean.
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: 600 supermono
Good stuff, im all for projects like this 
-
mattUKNC
- NWAA Supporter
- Posts: 1075
- Joined: Thu May 01, 2008 9:02 am
- Bike owned: Fury, NC30, CRF250L and a C90!
- Location: Surrey
Re: 600 supermono
Belly exit with the 250 fairing...blodnob wrote:Should have the fairing and seat next week.
Fancy an under seat exhaust or belly exit.
(If you can fit it in there, it's got to be done!)
-
banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
-
Smev
- Site Supporter
- Posts: 858
- Joined: Tue Apr 29, 2008 8:54 pm
- Bike owned: NC30 of course
- Location: The Mighty Cornwall :-)
Re: 600 supermono
Very nice Project dude
Don't forget to take loads of pics and keep a 'diary' or record of what you've done.
If it works out; - people will be asking you about it years into the future (speaking from experience!!!!!!)
Don't forget to take loads of pics and keep a 'diary' or record of what you've done.
If it works out; - people will be asking you about it years into the future (speaking from experience!!!!!!)
Mister Donut Rep NC30
-
marcus57
- Site Supporter
- Posts: 1142
- Joined: Sun Jul 04, 2010 1:21 pm
- Bike owned: nc30, nc35, gsxr750
- Location: Taunton
Re: 600 supermono
top work , will be keeping a eye on this
-
blodnob
- Site Supporter
- Posts: 33
- Joined: Sat Oct 02, 2010 11:59 pm
Re: 600 supermono
Well i got the engine in loose today. Just to see if there's gunna be any issues. Thers some but nowt i cant werk oround.
As i said it's a 600XR lump. But i think i may go to 680 with a bigbore liner i managed to pik up. It'll go well with the HC Wiseco piston (11.1) and the HRC cam.
I could do with a single carb head. But that'll have to wait
Anyhoo. Al keep yuz updated. Sean
As i said it's a 600XR lump. But i think i may go to 680 with a bigbore liner i managed to pik up. It'll go well with the HC Wiseco piston (11.1) and the HRC cam.
I could do with a single carb head. But that'll have to wait
Anyhoo. Al keep yuz updated. Sean