Hello,
can somebody tell me who is the configuration at the voltage regulator of the R1 RN1?
I need the position of the red an the green.
The other three I have under controll....
Thank you
Configuration voltage regulator of a R1
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Baustelle
- Settled in member
- Posts: 5
- Joined: Wed Nov 11, 2009 7:41 am
- Bike owned: 3xNc30,RSV Mille,Rs 125,Dnepr
- Location: near to Nürburgring
- Contact:
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Configuration voltage regulator of a R1
Whats the R/R look like?
3 yellow stator wires go to gray plug. It doesn't matter which yellow wire goes to which prong. Then you have green wires and red wires. The red wires go to the black plug on the prong closest to the gray plug. The green wires go on the black plug on the prong furthest from the gray plug. The middle prong on the black plug is not used. Use a good quality electrical connector for each wire to it's prong.
3 yellow stator wires go to gray plug. It doesn't matter which yellow wire goes to which prong. Then you have green wires and red wires. The red wires go to the black plug on the prong closest to the gray plug. The green wires go on the black plug on the prong furthest from the gray plug. The middle prong on the black plug is not used. Use a good quality electrical connector for each wire to it's prong.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...