nc24 carb query

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: nc24 carb query

Post by Neosophist »

royster81 wrote:do your nc24 carbs have rounded bottoms on the slides ?? :D
Mine do too ^_^
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: nc24 carb query

Post by royster81 »

if anyone has a set of rounded bottom slides they would like to sell please pm me ....thank you
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
Top
drew70
Settled in member
Posts: 46
Joined: Fri Jul 25, 2008 10:48 pm
Re: nc24 carb query

Post by drew70 »

Ebay is the place to find them ;)
Top
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: nc24 carb query

Post by royster81 »

drew70 wrote:Ebay is the place to find them ;)
if you can find them i'll buy them lol
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
Top
drew70
Settled in member
Posts: 46
Joined: Fri Jul 25, 2008 10:48 pm
Re: nc24 carb query

Post by drew70 »

:idea: Email this seller he might split

120287597880
and this one
250273013396
Top
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: nc24 carb query

Post by royster81 »

drew70 wrote::idea: Email this seller he might split
no luck lol
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
Top
RHonda
Settled in member
Posts: 8
Joined: Tue Aug 18, 2009 8:14 am
Re: nc24 carb query

Post by RHonda »

I have NC24. I checked the diameter of carbs and it is 34mm. But I read that they must be 29.
34mm is on rubber trumpets side, I didnt check diameters in the entrance to cylinders.

Does it mean, that carbs ar bored, enlarged?
Top
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: nc24 carb query

Post by Cammo »

NC24 carbs are 32mm, pretty sure it is cast into the bodies as VD32!

The measurement would be taken at the thinnest part of the venturi (bore).
"It's just a ride" Bill Hicks
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: nc24 carb query

Post by Neosophist »

RHonda wrote:I have NC24. I checked the diameter of carbs and it is 34mm. But I read that they must be 29.
34mm is on rubber trumpets side, I didnt check diameters in the entrance to cylinders.

Does it mean, that carbs ar bored, enlarged?
Measure your carbs properly.. they are 32mm

Where are you reading this 29mm from? I want to find whoever wrote it and jam my 32mm carbs in their face.
DataRacer wrote:NC24 carbs are 32mm, pretty sure it is cast into the bodies as VD32!

The measurement would be taken at the thinnest part of the venturi (bore).
Yes, It is written on the carbs, I think it says VDE2? I can't recall properlly without going to look :D
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
Post Reply

Return to “Honda - Workshop”