NC24 Rear wheel change

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
castrol101
Settled in member
Posts: 138
Joined: Wed Apr 30, 2008 7:41 pm
Location: Horsham, W.Sussex - UK
NC24 Rear wheel change

Post by castrol101 »

I know some people have changed the rear on their NC30 to a VFR750 wheel, And i was under the impression that this could not be done on the 24. But are there any wider wheels that could be fitted to an NC24?

Any ideas would be appreciated :ugeek:
Top
Streetfighter
Settled in member
Posts: 13
Joined: Tue Apr 29, 2008 8:44 pm
Location: Portchester
Re: NC24 Rear wheel change

Post by Streetfighter »

I don't think so.. I just put a 140 Bridgstone trye on my standard '24 wheel and it's tight, about 0.5 cm away from the chain.. A larger width 750 wheel I think would rub something (my exhaust from the collector backwards is totally custom so I wouldn't know if it would foul the standard exhaust)..
Top
castrol101
Settled in member
Posts: 138
Joined: Wed Apr 30, 2008 7:41 pm
Location: Horsham, W.Sussex - UK
Re: NC24 Rear wheel change

Post by castrol101 »

You got ne pictures of this?? Yea the standard wheel is pretty close to the exhaust link pipe, id have to have a closer look at that.
Top
Post Reply

Return to “Honda - Workshop”