hi guys..

i just want to know if anyone has done this modificaton before coz i'm planning to do that.

400cc bikes are quiet rare in my country. i only could find a VFR400(nc30) cowling to swap with my current R1 cowling.

I have put full nc29 bodywork on my nc30 (it was lying around the shed). So what you want to do is do this the other way around?

The front cowl wil fit, the bellypan won't. The nc30 bodywork is thinner.

Stickshift wrote:I have put full nc29 bodywork on my nc30 (it was lying around the shed). So what you want to do is do this the other way around?

The front cowl wil fit, the bellypan won't. The nc30 bodywork is thinner.

thanks Stickshift.

do u have any picture of her?

"I have put full nc29 bodywork on my nc30"
secretly he wished hed bought a NC29 instead.......lol

leopard_pagan wrote:"I have put full nc29 bodywork on my nc30"
secretly he wished hed bought a NC29 instead.......lol

...with no Pro Arm...

so the upper fits without modification? if thats a yes then im definitely going down that route, anyone know if i can use an nc30 upper and 29 lowers? and do i need to change my lights for the job (i need a new set anyway)

is the nc30 headlight fits nc29 ? anyone?

refers to the microfiches, both headlights using a different code/part number.

IIRC the actual head lamps are the same. But the mounting brackets are different.

I think the NC30 headlamps are further apart.

and slightly bigger in diameter.
bought a set of NC30 headlight covers having been told the same. i had to file them down a good 1/2cm to even fit the NC29

leopard_pagan wrote:and slightly bigger in diameter.
bought a set of NC30 headlight covers having been told the same. i had to file them down a good 1/2cm to even fit the NC29

so, u have fitted ur nc29 with nc20 headlight.
sis, do u have a picture of it ?
what's ur comment?

thanks in advance.

btw, this is from the microfiches.

NC29


NC30