Carb inlet rubbers, Which way round?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Carb inlet rubbers, Which way round?
Does anyone have a pic showing which way round the inlet rubbers go or doesnt it matter?
NC35 by the way but 30's are probably the same
NC35 by the way but 30's are probably the same
-
Jon
- Site Supporter
- Posts: 165
- Joined: Tue May 20, 2008 2:00 am
- Location: Brisbane
Re: Carb inlet rubbers, Which way round?
Not familiar with NC35 ones but the my NC30 ones have writing on one side; carb and up.
The writing faces towards the carbies and the up towards the cam covers.
If yours have no writing;
There is a tapered lip on the inside of the rubbers (kind of like a funnel), the bigger opening facing towards the carbies and smaller towards the motor.
Hope this helps
jon
The writing faces towards the carbies and the up towards the cam covers.
If yours have no writing;
There is a tapered lip on the inside of the rubbers (kind of like a funnel), the bigger opening facing towards the carbies and smaller towards the motor.
Hope this helps
jon