nc35 tyga exhaust fitment
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
jedidude04
- Settled in member
- Posts: 66
- Joined: Thu Jun 30, 2016 2:19 am
- Bike owned: RVF400
- Location: Australia, NSW
nc35 tyga exhaust fitment
Hey guys, just a quick question on both the single stack and twin stack Tyga systems. I currently have a single stack exhaust and it was a massive pain in the ass to get it to clear my chain, swingarm and shock.
I am just wondering if it is easier to position the twin stack for clearance? From what i'm looking at you only have half the pipe to work with and don't need to mess about trying to allign both front and rear headers..
Any tips would be appreciated, i have about 30mm increased ride height and preload on the rear maxed out (wrong spring).
Cheers
I am just wondering if it is easier to position the twin stack for clearance? From what i'm looking at you only have half the pipe to work with and don't need to mess about trying to allign both front and rear headers..
Any tips would be appreciated, i have about 30mm increased ride height and preload on the rear maxed out (wrong spring).
Cheers