Page 1 of 1

nc21 project 1995

Posted: Sun Nov 30, 2008 6:04 pm
by richy rich
hi all just bought a 1995 vfr nc21 non runner [cheep]cant find any info on this year bike[1995] it has a round headlight not the square one i have seen on all ebay stuff.it came with NO side front fairings or front cowl.dont know if it had them when new ??? any help full info on this bike would be nice . cheers rich please

Re: nc21 project 1995

Posted: Sun Nov 30, 2008 6:59 pm
by CMSMJ1
for starters..welcome ;)

I would say you have a bike that was first registered over here as 1995 as NC21 were not made for that long.

Some pics would be great in ID'ing the thinkg for you and you are 100% in the right place for some advice and help for sorting it out.

Re: nc21 project 1995

Posted: Sun Nov 30, 2008 7:18 pm
by richy rich
on log book it was made in 1995 but brought over to u.k in 1996,bike in bits at mo so will post a few pics when back together,it was kept out side for the last few years with no cover on and 2 piston barrels have filled with water through the carbs i think,so i am stripping the carbs first and getting the water out of barrels to see if worth carrying on with project .

Re: nc21 project 1995

Posted: Sun Nov 30, 2008 8:03 pm
by duncan
Is it a VFR400K?These are a naked unfaired bike with high handlebars and is the only VFR400 to have a centre-stand.They were made as a Japan-only training school bike.They were made for some time in small numbers well into the early 90's alongside the NC30

Re: nc21 project 1995

Posted: Sun Nov 30, 2008 9:08 pm
by richy rich
thank you, YES it does have a center stand,but looks as if it did have some sort of bottom fairing on it ?? one time.as it has brocken plastics behind the bottom engine bolts to frame.

Re: nc21 project 1995

Posted: Mon Dec 01, 2008 12:11 pm
by Neosophist
Ah happy memories, VFR400K's were common training school bikes...

Image

Image

These did not have a hyrdraulic clutch if I remember rightly.

There was also an NC21 called the 400Z.. this had no sidefairings or nosecone, just twin round lights and a bellypan, and a hydraulic clutch.

Image

Re: nc21 project 1995

Posted: Mon Dec 01, 2008 12:46 pm
by richy rich
thanks for pics !!!! the purple one is the one i have cheers mate

Re: nc21 project 1995

Posted: Fri Dec 05, 2008 1:02 pm
by Neosophist
Yeah thats probably a 1995 bike then, the bits are 95% NC21 bits so it has its roots in 1985.

I think the K stood for "Kyoushujo" which means training school in most of the Kanto regions, it might be spelled differently in other areas.

Considering they were training bikes though, there usually in good condition. Plus there quite comfy to ride:)

Re: nc21 project 1995

Posted: Fri Dec 05, 2008 5:34 pm
by nemesis
I may have a spare motor for an Nc21 if your interested !

I Will fire it up and see what it runs like

Re: nc21 project 1995

Posted: Sat Dec 06, 2008 12:41 pm
by richy rich
just got it running [like a dog ] but running when i get more spare time ill have a go sorting it out .YES I MIGHT BE AFTER A SPARE ENGINE !!HOW MUCH?? get back to you cheers richard