NC30 relay questions?
Posted: Thu Jun 26, 2014 6:41 pm
Hi guys,
Been working on my NC30 today trying to source the problem on why my indicators wont work (please see my other post: NC30 Indicators wont work!! (PLEASE HELP!!!)).
When I turn the ignition "ON" and put my multimeter probe on the middle grey/white wire that is the live going into the relay, and the other probe on my earth, it only reads about 6 volts!?
Am I right in thinking that with the ignition "ON" and me doing this to check that I have a live feed, that it should be reading 12 volts?
Many thanks....Cal
Been working on my NC30 today trying to source the problem on why my indicators wont work (please see my other post: NC30 Indicators wont work!! (PLEASE HELP!!!)).
When I turn the ignition "ON" and put my multimeter probe on the middle grey/white wire that is the live going into the relay, and the other probe on my earth, it only reads about 6 volts!?
Am I right in thinking that with the ignition "ON" and me doing this to check that I have a live feed, that it should be reading 12 volts?
Many thanks....Cal