KOSO RX1NR RPM signal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Em sea 19
- Settled in member
- Posts: 17
- Joined: Wed Aug 31, 2011 11:18 pm
KOSO RX1NR RPM signal
Hey guys,
I'm struggling to pull an rpm signal, I can get the obligatory noisey signal wrapped off a HT lead. However I can't for the life of me find one anywhere else.
I'm struggling to pull an rpm signal, I can get the obligatory noisey signal wrapped off a HT lead. However I can't for the life of me find one anywhere else.
-
bikemonkey
- NWAA Supporter
- Posts: 1524
- Joined: Tue Dec 27, 2011 12:33 pm
- Bike owned: 92 NC30, 90 VFR750
- Location: Oxfordshire
Re: KOSO RX1NR RPM signal
Have you got the inline coil pack connector?
It's a wire with two spade connectors and a bullet connector.
You put it inline with one of the coil pack's positive wire.
I've used it on my bike, see here: http://400greybike.com/forum/viewtopic. ... &start=110
I think I also posted the right settings for the dash too.
It's a wire with two spade connectors and a bullet connector.
You put it inline with one of the coil pack's positive wire.
I've used it on my bike, see here: http://400greybike.com/forum/viewtopic. ... &start=110
I think I also posted the right settings for the dash too.