KentCams and valve clearance.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
KentCams and valve clearance.
I have race engine with KentCams installed. I currenly realized that 2,3 cylinders has some issue you can see on the video below. Not defenitelly sure this is valve clearance issue. I have measured all and as I see I have problem only with 3 Exhaust all other within tolerances.
Here is valve clearance check:
And here is video: http://www.youtube.com/watch?v=EIxGbLC5 ... e=youtu.be
[youtube]http://www.youtube.com/watch?v=EIxGbLC5 ... e=youtu.be[/youtube]
Here is valve clearance check:
And here is video: http://www.youtube.com/watch?v=EIxGbLC5 ... e=youtu.be
[youtube]http://www.youtube.com/watch?v=EIxGbLC5 ... e=youtu.be[/youtube]
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: KentCams and valve clearance.
So, does anyone have idea ?
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: KentCams and valve clearance.
Not really mater - but I would be more worried by the tight exhaust clearances on cyl 3 if anything.
get them swapped for the looser clearances in cyls 1 and 2.
get them swapped for the looser clearances in cyls 1 and 2.
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate