Gk73a and Gk76a
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
xXxKillDogxXx
- Settled in member
- Posts: 49
- Joined: Sun Mar 18, 2012 5:43 pm
- Bike owned: GSXR400, RS125, RS50, RX50
- Location: Plymouth
- Contact:
Gk73a and Gk76a
Yh the other night i dropped a valve on my gk76a and mashed the top end so im wondering could i fit the gk73a engine or atleast just the top end and no the bottom end?
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Gk73a and Gk76a
Simple answer is no.
Different mounting on the heads.
You cannot even swop valves over as they are a different diameter shaft.
Different mounting on the heads.
You cannot even swop valves over as they are a different diameter shaft.
-
xXxKillDogxXx
- Settled in member
- Posts: 49
- Joined: Sun Mar 18, 2012 5:43 pm
- Bike owned: GSXR400, RS125, RS50, RX50
- Location: Plymouth
- Contact:
Re: Gk73a and Gk76a
Dam that sucks well i ordered a gk76a full top end gonna do the timing, valve clearences and new gaskets aswell of course but what i just wanna double check is..
is the timing on the gk76a 20 pins or 19 i do believe its 20 correct?
is the timing on the gk76a 20 pins or 19 i do believe its 20 correct?