clock cover

dt50james · Post by **dt50james** » Fri Mar 16, 2012 10:37 pm

Hi guys, i was cleaning my fzr today and while looking at the clocks i was wondering if the foam could be replaced with a shiney metal cover?

Ive seen them for other bikes but can find anyone who does them... If not im temped to get some made up in 1mm stainless laser cut out..

Cheers

Post by **Taggyd** » Sat Mar 17, 2012 7:31 am

yes you could and no never seen any before!

dt50james · Post by **dt50james** » Sat Mar 17, 2012 4:46 pm

im on to it :)

Post by **Evilchicken0** » Sun Mar 18, 2012 7:04 pm

One thing - if the sun hits it you might not be able to read the clocks

Why not some carbon

scooby4/6 · Post by **scooby4/6** » Sun Mar 18, 2012 7:48 pm

.nothing to see here,posted on the wrong thread...

Post by **Hogdigerdy Dog** » Sat Mar 24, 2012 4:25 pm

just a thought,
but is it there to soak up some of the vibrations, and stop the needle bouncy thing happening, and if so wouldn't a piece of metal make it worse ???

Post by **Evilchicken0** » Sat Mar 24, 2012 5:34 pm

No it's just trim there are 3 plastic screws that hold it onto the clocks themselves

Post by **Hogdigerdy Dog** » Sat Mar 24, 2012 5:50 pm

Evilchicken0 wrote:No it's just trim there are 3 plastic screws that hold it onto the clocks themselves

but why??
it's 1/4" foam and it's not exactly pretty
i cant imagine yamaha sticking it there purely for cosmetic purposes

Post by **Evilchicken0** » Sun Mar 25, 2012 11:27 am

Imagine again

clock cover

clock cover

Re: clock cover

Re: clock cover

Re: clock cover

Re: clock cover

Re: clock cover

Re: clock cover

Re: clock cover

Re: clock cover