Hmm ... Where to start

Long story short rather, my fork stem seals got warn and damaged which caused a "leak" onto my front brakes which corroded the pads which, in turn, damaged my discs. Sad story, I know.

Anyway, what's worse is that NC30 discs are not readily available here in RSA and to import new ones is going to cost me about R3,500

Now, what I need to know is, are there any discs that I could use instead? Interchangeable between models or some sort of generic? Because I do not have that kinda money laying around. I need to have her serviced, carbs cleaned and balanced and I need my chain adjusted, etc.

Any and all advice is appreciated.

Thanks in advance

thought South Africa had an abundance of vfr's enough so that you wouldn't have to import stuff like that...but anyhoo you can use discs from cbr400 nc29, vtr1000f, vfr750, cbr600f, cb400sf, cbr900, Honda rs125 and rs250 and also vtr250 I think

Thanks.

Is there a difference between the left and right discs?

bump

Dionysus wrote:Is there a difference between the left and right discs?

Depends which model you get the discs from. Some have a different drilling pattern, some don't. EG the original mega-drill discs are symmetrical, but later discs with fewer holes are different. I can't see it would do anything bad if you used them on the wrong side, though.

Dionysus wrote:bump

It's pretty bad manners to bump your post after 1 hour.

amorti wrote:

Dionysus wrote:bump

It's pretty bad manners to bump your post after 1 hour.

Was quite urgent as someone has 2 right side discs available at a decent price

Thanks for the info

NC30 Discs are stamped left and right.