power dies at 6000 rpm HELP
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
sparkie1989
- Settled in member
- Posts: 6
- Joined: Tue Jun 07, 2011 5:49 pm
power dies at 6000 rpm HELP
anybody got any ideas what it could be my bike pulls to 6000 rpm then powers stops sounds like the engine drops cylinders or hits a limiter as only just started doing this today HELP 
-
cosy
- Settled in member
- Posts: 40
- Joined: Mon Apr 18, 2011 8:06 pm
- Bike owned: 16th bike and still going
- Location: Kent
Re: power dies at 6000 rpm HELP
I had a recent similar experience and it was a loose emulsion tube.
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: power dies at 6000 rpm HELP
Sounds to me like the bike is hitting the inbuilt restrictor which is linked to the speedo.
Have you messed with the dash/clocks at all recently?
Have a look at all of the plugs around the dash and make sure they are clean and secure
Have you messed with the dash/clocks at all recently?
Have a look at all of the plugs around the dash and make sure they are clean and secure
-
sparkie1989
- Settled in member
- Posts: 6
- Joined: Tue Jun 07, 2011 5:49 pm
Re: power dies at 6000 rpm HELP
all sorted now turns out the carbs where loose thanks for the help guys 