Hi I'm trying to sort out my nc35 and every time I fix one thing I get anoter problem
Now my bike only runs on 3 cylinders. If I let my bike warn up 3 out of 4 exhaust pipes get warm
The one that isn't getting warn is the front right one ( nearest to the radiator cap)
I have cleaned carbs and put new spark plugs and still get the same problem.
It seems like it only wants to fire up when it wasn't to coz a few days ago I had this problem so I left the bike running , turn the bike off, waited a few min then started it up an all 4 were hot.
If I take the spark plug out the plug is dry so it's not flooding or anything.
The bike was running fine last year
Any ideas on what to check next ?
Thanks alex
Nc35 only running on 3 cylinders?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
code2006
- Settled in member
- Posts: 211
- Joined: Mon Jun 28, 2010 7:10 pm
-
code2006
- Settled in member
- Posts: 211
- Joined: Mon Jun 28, 2010 7:10 pm
Nc35 only running on 3 cylinders?
Ok this bike is playing games with me.
I think it's the ht leads from the coil as I stopped the bike for a bit, pushed the hd lead down into the spark plug ( didn't go down anymore tho) , fired the bike up and she is now running on all 4 cylinders I think
Well the exhaust pipe is hot but not all that hot so going to leave the bike to cool down an start her up again :@
I think it's the ht leads from the coil as I stopped the bike for a bit, pushed the hd lead down into the spark plug ( didn't go down anymore tho) , fired the bike up and she is now running on all 4 cylinders I think
Well the exhaust pipe is hot but not all that hot so going to leave the bike to cool down an start her up again :@