Page 1 of 2

Help finding a part....

Posted: Thu Dec 09, 2010 9:32 pm
by alexwitham
Hi Guys,

Part number 12:
http://www.cmsnl.com/honda-vfr400r3-199 ... _0400.html

Its the front brake master cylinder hose. David Silver states its un-available and now discountinued. Any ideas where I can get an aftermarket item of the same internal diameter?

Thank you.

Re: Help finding a part....

Posted: Thu Dec 09, 2010 9:54 pm
by CMSMJ1
either get on ebay and find the seller doing the rear HRC hose with a free fornt one...or your local pirtek or otrher hydraulic supplier.

Pretty sure the ebay seller sell the green rear hose and a red/pink ;) front one.

Re: Help finding a part....

Posted: Thu Dec 09, 2010 10:50 pm
by alexwitham
Thank you mate.

Re: Help finding a part....

Posted: Fri Dec 10, 2010 10:15 pm
by banoffee
non hygroscopic I believe it's called. got some in the garage if you want a piece

Re: Help finding a part....

Posted: Sat Dec 11, 2010 1:43 am
by alexwitham
After a 10cm piece if you can sort me out Steve?

Thanks,

Re: Help finding a part....

Posted: Sun Dec 12, 2010 11:51 am
by banoffee
PM me your address

Re: Help finding a part....

Posted: Sun Dec 12, 2010 12:24 pm
by royster81
alex, can you pop a picture up here when it's sorted as i'm interested to see it finished

Re: Help finding a part....

Posted: Sun Dec 12, 2010 12:33 pm
by Drunkn Munky
CMSMJ1 wrote:either get on ebay and find the seller doing the rear HRC hose with a free fornt one...or your local pirtek or otrher hydraulic supplier.

Pretty sure the ebay seller sell the green rear hose and a red/pink ;) front one.
I tried these and the front one sweats worse than the rear ones and discolours pretty quick too, mines in the bin now.
Image

Re: Help finding a part....

Posted: Sun Dec 12, 2010 1:38 pm
by alexwitham
Will do Rhory. Currently I've bodged it with a bit of that HRC res hose, as DM says, its sweating like a mo-fo (strange that as it doesn't sweat on the rear). Steve is sorting me out a bit of non-hygroscopic hose so will get a pic of both so you can see.

Thanks,

Re: Help finding a part....

Posted: Sun Dec 12, 2010 11:32 pm
by alexwitham
Image