Page 1 of 1
Headlight bulb question!!
Posted: Mon Nov 22, 2010 11:09 am
by spadey99
Hi there
I want brighter bulbs in the bike but heard that nc30s that are imported run lower wattage that cost a lot more, can you use normal h4 bulbs or will it burn the wiring loom?
Also when I rang for the insurance and said to the guy it was an import he said it isnt showing as an import so does it mean its a uk bike?
Any good place to get xenon effect bulbs for it?
Steve
Re: Headlight bulb question!!
Posted: Mon Nov 22, 2010 1:55 pm
by banoffee
if it's a UK bike then you should have the 60/55 bulbs already
if not, you need to fit a low beam relay:
http://www.vsource.org/VFR-RVF_files/NC ... mRelay.htm and snip the headlight lower lugs and use either a nail/pin or adapter rings (can get them from ebay).
does it have an oil cooler in the front fairing? got a pic of the bike?
Re: Headlight bulb question!!
Posted: Mon Nov 22, 2010 10:32 pm
by Neosophist
Once you get the low beam relay sorted (if needed) i'd recommend Phillips Extreeme bulbs... really good
Re: Headlight bulb question!!
Posted: Tue Nov 23, 2010 9:43 am
by thunderace
Neosophist wrote:i'd recommend Phillips Extreeme bulbs... really good
+1 for these beauties.
Also, where abouts are you? If you have any trouble fitting the relay I'd be only too glad to help if you're anywhere near Blackburn.
Re: Headlight bulb question!!
Posted: Tue Nov 23, 2010 7:08 pm
by spadey99
Hi mate
im in Cumbria dso only an hour from you so might call upon your help,
Steve
Re: Headlight bulb question!!
Posted: Tue Nov 23, 2010 9:11 pm
by graham72
thunderace wrote:Neosophist wrote:i'd recommend Phillips Extreeme bulbs... really good
+1 for these beauties.
Also, where abouts are you? If you have any trouble fitting the relay I'd be only too glad to help if you're anywhere near Blackburn.

Have to agree, immense improvement over standard bulbs!
Re: Headlight bulb question!!
Posted: Tue Nov 23, 2010 9:27 pm
by thunderace
spadey99 wrote:Hi mate
im in Cumbria dso only an hour from you so might call upon your help,
Steve
No problems matey, just drop me a PM and i'll send you my number.
BTW, I have all the necessaries in stock
