Page 1 of 2
vfr nc30 indicaters not working
Posted: Mon Nov 08, 2010 10:11 pm
by rob b
Hello.
Could somebody please help me. I have just required a verry nice vfr 400 a lovely bike. But I have one problem none of the indicaters are working. I asked the guy who owned it & he said they are a bit funny when cold but are ok when bike has wormed up I tried that & still not working. Many thanks.
Rob.
Re: vfr nc30 indicaters not working
Posted: Tue Nov 09, 2010 3:34 pm
by leef82
check the switch, it could be knackered or even the indicator relay and connections to indicators, things can get abit corroded or broken
lee
Re: vfr nc30 indicaters not working
Posted: Tue Nov 09, 2010 3:53 pm
by mattUKNC
Could you try another relay?
I probably have one in the garage you could try if need be?
Where abouts are you? There maybe someone closer who also has one.
Re: vfr nc30 indicaters not working
Posted: Tue Nov 09, 2010 5:41 pm
by rob b
Thanks for that guy's. I'm on anglesey north wales. If you wanted to sell one I would buy one from you.
Many thanks.
Rob.
Re: vfr nc30 indicaters not working
Posted: Wed Nov 10, 2010 11:57 am
by mattUKNC
rob b wrote:Thanks for that guy's. I'm on anglesey north wales. If you wanted to sell one I would buy one from you.
Many thanks.
Rob.
Sorry for delay Rob, PM you address and I'll get one posted.
Re: vfr nc30 indicaters not working
Posted: Wed Nov 10, 2010 11:00 pm
by rob b
Thanks
Any idea were the relay is on the bike & how to get at it. Thank you.
Rob.
Re: vfr nc30 indicaters not working
Posted: Wed Nov 10, 2010 11:11 pm
by Cammo
rob b wrote:I asked the guy who owned it & he said they are a bit funny when cold but are ok when bike has wormed up I tried that & still not working.
Pretty common problem with nc30's, the switchgear usually just needs a good clean.
Take it apart, spray it with contact cleaner (or wd40) and remove all the grease build up.
Re: vfr nc30 indicaters not working
Posted: Fri Nov 12, 2010 9:50 am
by leef82
rob b wrote:Thanks
Any idea were the relay is on the bike & how to get at it. Thank you.
Rob.
the relay is under the seat unit on the left side, next to the regulator/rectifier , its a little black unit
lee
Re: vfr nc30 indicaters not working
Posted: Fri Nov 12, 2010 8:17 pm
by rob b
Hi.
A big thank you to you all for youre help.
I took the switch off today & sprayed a bit of contact cleaner into it & bobs yours uncle it's working like new just a five minute job. Thanks guy's. Cheers.
Rob.
Re: vfr nc30 indicaters not working
Posted: Fri Nov 12, 2010 8:36 pm
by mattUKNC
rob b wrote:Hi.
A big thank you to you all for youre help.
I took the switch off today & sprayed a bit of contact cleaner into it & bobs yours uncle it's working like new just a five minute job. Thanks guy's. Cheers.
Rob.
nice one. Does that mean I don't need to post the flasher unit that's still sat on the side here?
