Page 1 of 2
Tyga twins with maggots
Posted: Sat Oct 16, 2010 4:50 am
by Newflee
Anyone ever run tyga full system twins with Moto maggots?
Would look sweet and probably sound great. I'm in the market for a single or double maggot full tyga system and need to know before pressing the BUY button.
Thanks, any thoughts are appreciated.
Oh ya.......a 95 RVF no previous mods.
Lee
Re: Tyga twins with maggots
Posted: Sat Oct 16, 2010 9:09 am
by Drunkn Munky
A quick search will tell you the maggot is a loud can, very loud. If that doesnt bother you then go for it, i can think of better cans to go with but twin maggots would look cool.
Might be best to go up a size or 2 on the main jets, extra washer under the needles and HRC slide springs
Re: Tyga twins with maggots
Posted: Sat Oct 16, 2010 1:49 pm
by ChowderV4
do it!
yes it will be loud as thunder....but i really want to see someone do this just to see how loud it will be

Re: Tyga twins with maggots
Posted: Sat Oct 16, 2010 2:13 pm
by Hadies
Only deaf people would consider this. And if they're not deaf, won't be long before they are.
It would look ace though. DO IT!!
Re: Tyga twins with maggots
Posted: Sun Oct 17, 2010 2:46 am
by Morespeedvicar
Hi, i had twin megaphone pipes on my nc30, they looked and sounded great but was TOO loud, they did actually give me a head ache and made me ears ring so be warned! Tho you could always put in a couple of baffles, if you can get them for Maggots?
Heres a pic :
I've myself a twin Micron system now, with stubby cans, but you'll have to wait a day or two to see that!
Cheers
Ian
Re: Tyga twins with maggots
Posted: Sun Oct 17, 2010 3:30 am
by Newflee
Sounds like it might be a bit much in terms of db's. I love the look of the maggots though and here in Canada we are always having to put up with the countless Harleys running straight pipes. I don't think there are any issues with sound law enforcement but if I'm going to not enjoy the level of sound it may not be a good choice. Too bad the youtube videos don't give an accurate idea of the volume and tone. I want to go the twin stack route for sure so Carbon cans it just might have to be.
Thanks for the advice guys.
Lee
Re: Tyga twins with maggots
Posted: Mon Oct 18, 2010 4:01 pm
by sa.racing
You won't be able to run twin maggot's anyway as they are a 50.8mm (2inch) inlet and the pipework on the twin stack's are 38mm ish from memory, you could contact Paul at tyga and see if he can make you up a couple to fit and they would be a bit quieter due to the size but probably not much.
Simon
Re: Tyga twins with maggots
Posted: Mon Oct 18, 2010 4:11 pm
by Neosophist
Morespeedvicar wrote:Hi, i had twin megaphone pipes on my nc30, they looked and sounded great but was TOO loud, they did actually give me a head ache and made me ears ring so be warned! Tho you could always put in a couple of baffles, if you can get them for Maggots?
Heres a pic :
I've myself a twin Micron system now, with stubby cans, but you'll have to wait a day or two to see that!
Cheers
Ian
Looks like a Motad can.. who made that out of curiosity..
Re: Tyga twins with maggots
Posted: Mon Oct 18, 2010 7:34 pm
by Morespeedvicar
Hiya, there just a couple of cheap ebay jobbies for a old british bike think they were about £15 each and came with adapters for differant pipe sizes, i only did it as an experiment to see how loud they would be before i spent a fortune on stainless ones. but they were too loud to put up with long term, which is a shame really cos i really like the look.
But having said that my stubby micron pipes look good now that ive done the stainless link pipes.
Cheers
Ian
Re: Tyga twins with maggots
Posted: Mon Oct 18, 2010 10:29 pm
by Variablevalves suck
I know a guy in Stoke that makes one off mega style cans and could/would build to any given spec.
Chris.