Page 1 of 1
Rubber flaps on an NC30
Posted: Tue Sep 28, 2010 11:19 am
by ibby4585
Im fitting a rubber flap/wind deflector thingy to my Seed NC30 in the hope that it might cure a top end flat spot.
My question is. Does the lower flap/ the larger one point forwards and rest on the engine near the front spark plug leads or does it flip back towards the carbs??
I know the top flap rests under the carbs.
Ive checked all five of my NC30's and it appears the previous owners didnt have a clue either!!
Ta
Kris
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 7:30 am
by ibby4585
Either 34 people have read this and don't know how it fits OR
34 people have read and thought jesus that's embarrassing doesn't he know that!!
Kris
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 9:46 am
by Cammo
ibby4585 wrote:Either 34 people have read this and don't know how it fits OR
I'm one of those 34 people...
I just cable tied it to the frame tube that runs in front of the airbox. Close enough!
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 11:46 am
by ibby4585
Oh well, ive place on frame tube with the lower flap pointing forward it might make a difference to my flat spot.
Kris
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 4:37 pm
by arsey30
I think the lower flap goes forward over the cam cover to direct the incoming cold air into the airbox, the upper flap under the cards to reduce hot air rising from the engine, into the airbox.
Thats the way I did it.
Dave.
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 4:42 pm
by ibby4585
Cheers Dave.
Thats how i did it in the end.
Kris
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 9:19 pm
by mick.mh2racing
ibby4585 wrote:Either 34 people have read this and don't know how it fits OR
34 people have read and thought jesus that's embarrassing doesn't he know that!!
Kris
Or maybe thought "Jesus I haven't a clue, I ought to know but don't"
Re: Rubber flaps on an NC30
Posted: Thu Sep 30, 2010 9:53 pm
by ibby4585
mick.mh2racing wrote:ibby4585 wrote:Either 34 people have read this and don't know how it fits OR
34 people have read and thought jesus that's embarrassing doesn't he know that!!
Kris
Or maybe thought "Jesus I haven't a clue, I ought to know but don't"
Haha, i think your bang on Mick!!
Kris
Re: Rubber flaps on an NC30
Posted: Fri Oct 01, 2010 9:46 pm
by royster81