will this bloody bike ever run right!!!!!!!!!!!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
dl
- Settled in member
- Posts: 15
- Joined: Sun May 30, 2010 9:04 pm
- Bike owned: GK76A
will this bloody bike ever run right!!!!!!!!!!!
Hi everyone
HELP!!!! rebuilt the carbs new orings new pilot screws. started the bike and still Cylinders no 1&2 get very hot quickly and 3&4 not getting worm atall. there is a spark at the plugs and each coil does alturnate cylenders. Bike wont tick over but if you keep the revs up it will run ,all be it not right. When it dose stall the engine only turns over very slowly and wont start. I am convinced the carbs/orings are ok. any clues any one????
Dave
HELP!!!! rebuilt the carbs new orings new pilot screws. started the bike and still Cylinders no 1&2 get very hot quickly and 3&4 not getting worm atall. there is a spark at the plugs and each coil does alturnate cylenders. Bike wont tick over but if you keep the revs up it will run ,all be it not right. When it dose stall the engine only turns over very slowly and wont start. I am convinced the carbs/orings are ok. any clues any one????
Dave
-
stripes1976
- Familiar Member
- Posts: 399
- Joined: Sun Jun 01, 2008 7:14 pm
- Bike owned: 6 gk76a's, nc29
- Location: 76a mod shop
-
dl
- Settled in member
- Posts: 15
- Joined: Sun May 30, 2010 9:04 pm
- Bike owned: GK76A
Re: will this bloody bike ever run right!!!!!!!!!!!
Just checked the compretion and all 4 cylinders read 125psi ! at least it looks like the engines ok !