Page 1 of 1
Fitting HRC rear brake pipe
Posted: Fri Jun 06, 2008 5:01 pm
by chrisja2
Bought one of the kits, arrived through the post. Unfortunately the envelope had come partially open. Now i have the green tube, a bung and one small jubilee clip. Have fitted the tube ok but the jubilee clip appears to be too small. Am i missing a part or is it the wrong one? Apart from that it appears straight forward. Cheers in advance.
Chris.
Re: Fitting HRC rear brake pipe
Posted: Fri Jun 06, 2008 5:39 pm
by chris
From memory (it has been a long time since i fitted one) the tight fitting jubelee clip goes on the bottom to hold the tube onto the master cylinder and there should be like a springy clip thing that sits above the barb on the bung and prevents it from popping out.
Re: Fitting HRC rear brake pipe
Posted: Sat Jun 07, 2008 10:06 am
by tanuki
chris wrote:From memory (it has been a long time since i fitted one) the tight fitting jubelee clip goes on the bottom to hold the tube onto the master cylinder and there should be like a springy clip thing that sits above the barb on the bung and prevents it from popping out.
+1 although I never bother with the spring clip thing only the jubilee
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 9:53 am
by chrisja2
tanuki wrote:chris wrote:From memory (it has been a long time since i fitted one) the tight fitting jubelee clip goes on the bottom to hold the tube onto the master cylinder and there should be like a springy clip thing that sits above the barb on the bung and prevents it from popping out.
+1 although I never bother with the spring clip thing only the jubilee
Right my jubilee clip is to darn small so ive fitted one of my own, works a treat now with the microswitch fitted too !
:D
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 10:45 am
by tanuki
mate we need to hook upfor a spin soon..
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 10:57 am
by chrisja2
tanuki wrote:mate we need to hook upfor a spin soon..
Why are you back on the road billy? What about wednesday evening MFN?
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 12:35 pm
by tanuki
chrisja2 wrote:tanuki wrote:mate we need to hook upfor a spin soon..
Why are you back on the road billy? What about wednesday evening MFN?
all done and dusted mate I am working until 7 on Weds and Thurs

spose I could get a dog burger up there.
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 1:53 pm
by chrisja2
tanuki wrote:chrisja2 wrote:tanuki wrote:mate we need to hook upfor a spin soon..
Why are you back on the road billy? What about wednesday evening MFN?
all done and dusted mate I am working until 7 on Weds and Thurs

spose I could get a dog burger up there.
Ok let us know Billy, will meet ya up there and have a drool over the 35.
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 2:37 pm
by tanuki
what about the Ox on Tuesday night weather dependant
http://first4gear.com/bikemeets/wildox.html
Re: Fitting HRC rear brake pipe
Posted: Sun Jun 08, 2008 4:00 pm
by chrisja2
Looks good to me, what time would you be setting off over there?